|Minimum Order Quantity||25 Litre|
|Pack Size||20 Ltr|
|Packaging Type||Bottle and Drum|
|Application||Industrial Use, Domestic Use|
|Specific Gravity||1.02 +/- 0.030 Kg/Liter|
|Pack Sizes LT/KG||20 Ltr|
ABOUT RUST CONVERTER
The chemical mode of action of rust converters is the conversion of porous and loose iron oxide (rust) into firmly adhering iron phosphate layers. Rust Converter is a water base coating. When used as a single coat, rust scales are converted into a dark black film, which retards further rust formation & also works as primer or base coat for any other protective coating.
Step-1: Remove loose paint/ rust scales with wire brush. In case of blisters formed on the metallic surfaces, their complete removal is necessary.
Step-2: Give first coat of diluted Rust Converter (1 part rust converter and 1 part water) on to the cleaned surface. This will act as primer for Rust converter treatment. Step-3: Apply one coat of Rust Converter with brush or spray. It will form a black dark coating.
Step-4: Apply second & third coat, each after 4-6 hours gap for best results. It will finally form a blue – black dark protective coating on the metal surface.
Step-5: It takes 48 hrs for complete process of rust conversion to protective coating.
WHAT RUST CONVERTER CAN DO…
Not only does it eliminate existing rust, but it seals out moisture to prevent the possibility of future rust formation and corrosion.
WHERE TO APPLY RUST CONVERTER
1. Rust Converter is an alternative to surface preparation by sand blasting, grinding etc. 2. Storage tanks, pipes, metal structures, machinery tools, 3. Trucks/auto bodies, bridges, ships, or any metal surface 4. Any Spare Parts liable to rusting.