Red Oxide Primer

Product Details:

TOPCOAT Red Oxide Metallic Primer is a Pigment-Epoxy-Alkyd based coating, recommended as an environment friendly water proofing system on all types of metal and wooden surfaces.
ABOUT TOPCOAT RED OXIDE METALLIC PRIMER
TOPCOAT RED OXIDE METALLIC PRIMER is a hybrid polyester resin base. For metal & wooden surfaces, we have this unique product, which protects against . If a micron thickness of about 35-40 is given on Machined /cleaned casting, Machined spares. It will remain rust free for the months together.
This coating system makes a perfect coating system for exportable spare parts. In nutshell, we can say that, TOPCOAT RED OXIDE METALLIC PRIMER is ultraviolet stable and does not discolor in sunlight. It is quick drying, long lasting and protects oxidation, fungus and corrosion.
APPLICATION METHOD
Ca n be appl i ed w it h a n y conventional method like brush, spray or trowel.
WHAT TOPCOAT RED OXIDE METALLIC PRIMER CAN DO…
1. It is transparent and forms a flexible clear Plastic coating. 2. It is Ultraviolet stable and does not fade or discolor in Sunlight & Rain 3. It is Water Proof & Quick Drying 4. Gives Good Adhesion on Plastic Surface. 5. Prevents Fungus and Corrosion 6. Protects oxidation 7. Washable 8. Increases Glaze 9. Hygienic 10. Protects Germs 11. Avoids decay of wood.
WHERE TO APPLY TOPCOAT RED OXIDE METALLIC PRIMER
1. Can be easily applied on Metal and Wood surface. 2. Wood, concrete, machinery, equipment, Marine fixtures, sign boards and battery terminal etc.

Additional Information:

• Packaging Details: MS 20 LTR DRUM

Product Details:

TOPCOAT Red Oxide Metallic Primer is a Pigment-Epoxy-Alkyd based coating, recommended as an environment friendly water proofing system on all types of metal and wooden surfaces.
ABOUT TOPCOAT RED OXIDE METALLIC PRIMER
TOPCOAT RED OXIDE METALLIC PRIMER is a hybrid polyester resin base. For metal & wooden surfaces, we have this unique product, which protects against . If a micron thickness of about 35-40 is given on Machined /cleaned casting, Machined spares. It will remain rust free for the months together.
This coating system makes a perfect coating system for exportable spare parts. In nutshell, we can say that, TOPCOAT RED OXIDE METALLIC PRIMER is ultraviolet stable and does not discolor in sunlight. It is quick drying, long lasting and protects oxidation, fungus and corrosion.
APPLICATION METHOD
Ca n be appl i ed w it h a n y conventional method like brush, spray or trowel.
WHAT TOPCOAT RED OXIDE METALLIC PRIMER CAN DO…
1. It is transparent and forms a flexible clear Plastic coating. 2. It is Ultraviolet stable and does not fade or discolor in Sunlight & Rain 3. It is Water Proof & Quick Drying 4. Gives Good Adhesion on Plastic Surface. 5. Prevents Fungus and Corrosion 6. Protects oxidation 7. Washable 8. Increases Glaze 9. Hygienic 10. Protects Germs 11. Avoids decay of wood.
WHERE TO APPLY TOPCOAT RED OXIDE METALLIC PRIMER
1. Can be easily applied on Metal and Wood surface. 2. Wood, concrete, machinery, equipment, Marine fixtures, sign boards and battery terminal etc.

Additional Information:

• Delivery Time: 1 DAY
• Packaging Details: 20 LTR MS DRUM

Product Details:

ABOUT RED COAT 
Red Coat is completely moisture-free and gives a good waterproof layer and is better than Tar felted substitute. It is the first step for giving foolproof water proofing to roofs and is compatible with any type of roof-strata.
AREA OF APPLICATION 
Normally, it becomes problematic, when the source of seepage/dampness is not traced or identified and one needs to stop the walls from getting moisture/dampness. Because of the water seepage, the costly paints peel-off & the rooms look very dirty and shabby due to saltpeter formation. Besides this, the moisture brings a bad smell, efflorescence, which is un-hygienic.
APPLICATION METHOD 
Step – 1: Apply 2 coats of Tuffcrete first. Step - 2: Apply 2 -3 coats of WS (Water Soluble) Red Coat. The Mixing ratio of Red Coat to water shall be 1:0.3 for first coat and 1:0.1 for subsequent coats.
Step - 3: Give third coat of step 2 mix after a gap of 4 hrs. If any cracks appear, then use the fiber mesh for complete sealing of the crack.
Step – 4: Re plaster this area using 1% C- Max in the cement used.
WHAT RED COAT Can Do…
Useful for water-proofing and dealing with seepages. Anti-corrosion solution for exterior surfaces.
WHERE TO APPLY RED COAT
It can be applied on exposed TORR/MS steel rods to avoid corrosion in the RCC roofs. It can also It can be applied on exposed TORR/MS steel rods to avoid corrosion in the RCC roofs. It can also be applied on the walls affected by rising seepages. It can be applied even on live standing trees, which are attacked by termites. Can be applied both above and below ground including any exterior metal surface like ladders, gutters, fences, gates and even in marine environments

Additional Information:

• Item Code: HSN32089022
• Production Capacity: 500000 ltr per month
• Delivery Time: ONE WEEK
• Packaging Details: PLASTIC CONTAINER